SF-112 Facade silicone paint with high resistance to dirt
Ready-to-use, based on silicone emulsion and combination of acrylic binders. Easy to apply, forms a flexible coating that protects the surface from moisture in the best possible way. It is characterized by very high vapor permeability, high resistance to factors of environmental pollution, UV rays, as well as high mechanical resistance. It is an ecological product resistant to microorganisms and little susceptible to contamination. For interior and exterior works.
Use of SF-112 facade silicone paint with high resistance to dirt
The paint is recommended for the restoration of monuments and buildings subject to the adverse effects of pollution factors. Suitable for application on substrates: mineral plasters, old and new thin-layer mineral, acrylic, silicate and silicone plaster, concrete, gypsum boards, solid layers of mineral and dispersion paints. Not recommended to apply on plastic, lacquered coatings, lime and distemper paints, elastic dispersion paints, and surfaces covered with oil. If the facade intended for painting is in an area where an increased concentration of mosses, algae and so on can be observed (for example, near forests, water bodies), it is recommended to strengthen the stability of the paint by adding a bactericide (additional protecting coat) substance.
Technical data:
- Composition: silicone resin, acrylic binders, fillers and pigments
- Bulk density: about 1,50 g/cm3
- Vapor permeability of the coating: ≥ 150 g/m2 24h
- Resistance to wiping with wet fabric: ≥ 5000 cycles
- Capacity: 5 l 15 l
- Storage: up to 12 months from the manufacturing date in a dry place in undamaged packaging at the temperature from +5ºС to +25ºС
Operating temperature: from +5oC to +25oC
Consumption: about 150-250 ml/m2 depending on the absorbency and the structure of the working substrate, as well as the chosen painting method
Drying time of the coating: about 12 hours at the temperature of +20oC
Colour: 268 colour palette